Polyaspartic Concrete Coatings — Installed in One Day, Built to Last a Lifetime
4x stronger than epoxy. UV-stable topcoat that won't yellow. Won't peel or chip. Garages, basements, patios, and commercial spaces across NE Georgia.
If your garage floor is cracked, stained, and covered in dust, you already know it needs help. But if someone quoted you an epoxy coating, here's what they probably didn't mention: most epoxy yellows within a year, peels under hot tires, and chips on impact. That's not a coating problem — it's an epoxy problem.
We install polyaspartic coatings. Different product. Different results.
The polyurea base coat bonds to concrete at a molecular level. The polyaspartic topcoat is UV stable — meaning the clear coat won't yellow or fade, even in a south-facing garage with the door open all summer. It's 4x stronger than epoxy, resistant to chemicals, oil, salt, and hot tires, and it cures fast enough that we can install your entire floor in one day. You can walk on it the next morning.
This isn't a DIY kit from a home improvement store. This is professional-grade material applied by certified installers using industrial diamond grinders to prepare your concrete surface properly. That surface prep is the reason the coating bonds permanently instead of peeling in year two.
Epoxy vs. Polyaspartic: The Real Comparison
We're not against epoxy as a category — our system actually uses an epoxy primer as part of the base where it makes sense. But for the topcoat that takes the abuse, polyaspartic is a different league.
| Standard Epoxy | Polyaspartic | |
|---|---|---|
| Strength | Baseline | 4x stronger |
| UV stability | Yellows over time | Clear topcoat won't yellow. Ever. |
| Hot tire pickup | Common failure point | Resistant |
| Chemical resistance | Moderate | Oil, salt, gas, brake fluid — no stain |
| Cure time | 3–7 days | Walk-on ready next morning |
| Installation time | Multi-day process | One day |
| Lifespan | 2–5 years typical | 15-year manufacturer warranty (adhesion) |
| Temperature tolerance | Cracks in freeze/thaw | Performs -30°F to 140°F |
Where We Install Concrete Coatings
Garage Floors
The most common request. Turn a cracked, stained concrete slab into a showroom-quality floor in one day. Choose from chip flake patterns, solid colors, or metallic finishes.
Basements
Moisture-resistant, easy to clean, and warmer underfoot than bare concrete. Transforms an unfinished basement into usable living space.
Patios
UV-stable topcoat and slip-resistant finish. Handles Georgia sun, Georgia rain, and years of foot traffic.
Commercial and Industrial
Restaurants, workshops, auto shops, warehouses, retail spaces. Chemical-resistant, impact-resistant, and easy to maintain. We do commercial jobs on weekends and off-hours when your business needs us to.
Our Process
Free on-site proposal.
We measure, assess the concrete condition, discuss options and colors, and give you a written price.
Surface preparation.
Industrial diamond grinders remove the top layer of concrete, along with any old coatings, paint, or contaminants. We fill cracks and repair damage. This step is what separates a professional installation from a DIY kit.
Base coat application.
Polyurea or epoxy primer bonds to the prepared concrete.
Chip flake / color broadcast.
Your chosen color and pattern are broadcast into the wet base coat.
Polyaspartic topcoat.
The UV-stable, high-gloss clear topcoat seals everything in. It stays clear and won't yellow — this is the layer that makes the floor bulletproof.
Inspection and cure.
Light foot traffic the next morning. Vehicles in 24–48 hours depending on conditions.
Total time on site: one day for most residential garages.
Frequently Asked Questions
Most residential garage floors are completed in one day. Surface preparation, base coat, chip flake broadcast, and polyaspartic topcoat are all applied in a single visit. You can walk on the floor the next morning and park vehicles in 24–48 hours.
Epoxy is a resin-based coating that's been used for decades but has known weaknesses: it yellows from UV exposure, can peel under hot tires, and takes 3–7 days to cure. Polyaspartic coatings are 4x stronger, chemical resistant, and cure in hours instead of days. The clear polyaspartic topcoat is UV stable and won't yellow.
Yes. During surface preparation, we fill cracks and repair damage before applying the coating. The industrial diamond grinding process ensures a clean, properly profiled surface for the coating to bond to. Severe structural cracks may need assessment, but standard settling cracks and hairline fractures are addressed during prep.
Our polyaspartic coatings come with a 15-year manufacturer warranty for adhesion between the coating and the concrete. With normal residential use, they typically last well beyond that. The polyaspartic topcoat is UV stable and won't yellow — it resists chemical staining, hot tire pickup, and impact damage. These are the common failure points that cause cheaper coatings to need replacement in 2–5 years.
Absolutely. We install polyaspartic coatings on garage floors, basements, patios, and commercial spaces. The UV-stable topcoat formula works in direct sunlight (patios) and the moisture-resistant properties make it ideal for basements.
Cost depends on square footage, concrete condition, and the finish you choose (chip flake, solid color, or metallic). Most residential garage floors fall in the range of comparable home improvement projects. We provide free on-site proposals with a written price — no surprises.
Your garage floor can look this good by tomorrow. Seriously.
Get a free proposal for polyaspartic concrete coatings. One day install. 15-year adhesion warranty.